Pelco TLR3168 operation manual Main Menu, Display Menu Display Mode, TIME/DATE Size, Blue Back

MAIN MENU

<MAIN MENU>

DISPLAY TIMER PROGRAM RECORDING SET UP REAR TERMINAL MAINTENANCE CLOCK/FIRST TIME SET UP

Use JOG to select, and ENTER.

Press MENU to exit.

00446

Figure 15. Main Menu

The contents of the Main menu are as follows. Access it by pressing the MENU button.

•DISPLAY

Sets the format to display the time and date on the monitor.

•TIMER PROGRAM

Sets the timed recordings.

•RECORDING SET UP

Sets the alarm recording mode, alarm recording duration, emergency recording, etc.

•REAR TERMINAL

Sets the number of frames or fields to record for CLK OUT, output signal of the CALL OUT terminal, the MODE OUT terminal, etc.

•MAINTENANCE

Displays the power loss list, alarm list, etc. Also, initializes all menu settings. Clears the power loss list and alarm list.

•CLOCK/FIRST TIME SET UP

Sets the time and date, quasi v-sync, VCR operation when the end of the tape is reached, etc.

<DISPLAY>
DISPLAY MODE	1
TIME DATE SIZE	SMALL
BLUE BACK	OFF

e.g.<MODE 1>

07-09-’00 00:00:00

00447

Figure 16. Display Menu

DISPLAY MENU

DISPLAY MODE

This is where you set the display mode. (Set the current time and date in the Clock/First Time Set Up menu. Refer to the Clock/First Time Set Up Menu section.)

DISPLAY MODE 1 Displays date (month, day, year), time (hour, minute, second), and alarm recording counter.

DISPLAY MODE 2 Displays date, day of the week (SUN, etc.), alarm recording counter, time, and recording mode.

DISPLAY MODE 3 Displays nothing until alarm recording starts—then date, day of the week, alarm recording counter, time, and recording mode are displayed.

DISPLAY MODE 4 Displays nothing on the monitor, even during alarm recording.

TIME/DATE SIZE

This is where you set the size of the letters in the time and date display.

SMALL The letters become small.

LARGE The letters become large.

BLUE BACK

This is where you set the background color.

ON The blue-colored screen overlays the recorded picture when the menu is displayed on the monitor.

When the setting is ON and the video signal is not input, the background color is blue. The warning “NO SIGNAL” flashes on the screen, and “noSIg” flashes on the fluorescent display.

OFF The recorded picture is overlaid with the menu display.

When the setting is OFF and the video signal is not input, the background is blue when the menu is displayed on the monitor.

Pelco Manual C673M (2/01) 27