![](/images/new-backgrounds/1206439/20643961x1.webp)
MODE OUT | Sets the state in which the signal output at the MODE OUT terminal is | |
| switched to active. When you turn the JOG dial, the display switches in | |
| the following order, and under the following circumstances: | |
| • | REC – During recording |
| • | PLAY – During playback |
| • | POWER – While the VCR is turned on |
| • | TAPE IN – When you insert a tape in the VCR |
| • | TAPE REMAIN – When the tape has about nine minutes left (at |
|
| 6H mode) |
| • | CLOCK ADJ – When the clock indicates 00:00 |
|
| (minutes:seconds), output the signal for one second only |
REC IN | Sets the REC IN terminal’s operating mode. | |
| • | SERIES – Recording starts when the REC IN terminal is |
|
| grounded. |
| • | |
|
| terminal is grounded. Recording may not start if the input period is |
|
| short. |
| • | SYNC REC – Video signal from the multiple of three or five |
|
| (depending on recording mode) cameras can be recorded |
|
| separately by connecting a switcher. |
Pelco Manual C673M (2/01) | 31 |