Billion Electric Company 400G manual Factory Default Settings

Billion 400G Router

Factory Default Settings

Before configuring your, you need to know the following default settings.

Web Interface (Username and Password)

Username: admin

Password: admin

The default username and password are “admin” and “admin” respectively.

Attention

If you ever forget the username/password to login to the router, you may press the RESET button for 6 – 8 seconds to restore the factory default settings.

Caution: After pressing the RESET button for more than 6 seconds, to be sure you power cycle the device again.

Device LAN IP settings

IP Address: 10.0.0.2

Subnet Mask: 255.255.255.0

ISP setting in WAN site

PPPoE

DHCP server

DHCP server is enabled.

Start IP Address: 10.0.0.100

IP pool counts: 100

LAN and WAN Port Addresses

The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown below.

LAN Port

WAN Port

IP address

Subnet Mask

DHCP server function

IP addresses for distribution to PCs

10.0.0.2

255.255.255.0

Enabled

100 IP addresses continuing from 10.0.0.100 through 10.0.0.199

The WAN protocol has been pre-selected and set by Telkom for automated service deployment and delivery.

13

Chapter 3: Basic Installation