Description: User-definable name for the connection.
VPI/VCI: Enter the information provided by your ISP.
NAT: The NAT (Network Address Translation) feature allows multiple users to access
the Internet through a single IP account, sharing a single IP address. If users on your LAN
have public IP addresses and can access the Internet directly, the NAT function can be
disabled.
Username: Enter the username provided by your ISP. You can input up to 128
alphanumeric characters (case sensitive). This is in the format of “username@ispname”
instead of simply “username”.
Password: Enter the password provided by your ISP. You can input up to 128
alphanumeric characters (case sensitive).
IP Address: Your WAN IP address. Leave this at 0.0.0.0 to automatically obtain an IP
address from your ISP.
Authentication Protocol Type: Default is Chap (Auto). Your ISP advises you whether
to use Chap or Pap.
Connection: If you want the router to establish a PPPoA session when starting up and
to automatically re-establish the PPPoA session when disconnected by the ISP.
RIP: RIP v1, RIP v2, RIP v1+v2 and RIP v2 Multicast.
MTU: Maximum Transmission Unit. The size of the largest datagram (excluding
50