Billion Electric Company BIPAC-741 GE V2.0 Information from the ISP, LAN and WAN Port Addresses

Billion BIPAC-741 GE V2.0 ADSL Firewall Router

If you ever forget the password to log in, you may press the RESET button to restore the factory default settings..

3.4.2 LAN and WAN Port Addresses

The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown below.

	LAN Port	WAN Port
IP address	192.168.1.254	The PPPoE Routed
		Mode function is
Subnet Mask	255.255.255.0	enabled to automatically
		get the WAN port
DHCP server function	Enabled
		configuration from the
		ISP, but you have to set
IP addresses for	100 IP addresses continuing from
distribution to PCs	192.168.1.100 through 192.168.1.199	the username and
	(Actually, it can support up to 253	password first.
	users.)

3.5 Information from the ISP

Before configuring this device, you have to check with your ISP (Internet Service Provider) what kind of service is provided such as PPPoE, PPPoA, RFC1483, IPoA, or PPTP-to-PPPoA Relaying.

Gather the information as illustrated in the following table and keep it for reference.

PPPoE	VPI/VCI, VC-based/LLC-based multiplexing, Username,
	Password, Service Name, and Domain Name System (DNS)
	IP address (it can be automatically assigned from ISP or be
	set fixed).
PPPoA	VPI/VCI, VC-based/LLC-based multiplexing, Username,
	Password, and Domain Name System (DNS) IP address (it
	can be automatically assigned from ISP or be set fixed).
RFC1483 Bridged	VPI/VCI, VC-based/LLC-based multiplexing and configure
	this product into BRIDGE Mode.
RFC1483 Routed	VPI/VCI, VC-based/LLC-based multiplexing, IP address,
	Subnet mask, Gateway address, and Domain Name System
	(DNS) IP address (it is fixed IP address).

17