BC2403 Series Brush Cutter Owner’s Manual
OPERATION |
|
OPERATOR CONTROLS |
|
The operator’s station is at the rear of the machine between the handlebars. The operator should STAND in a position to | |
which allows sufficient | controls are |
1 | 4 |
|
2
7
3
| Operator Control |
| |
| Clutch Lever | 5 |
|
| Lever | 6 | Dri |
3 | Choke | 7 | Pull Starter |
4 | Throttle |
|
|
STARTING
CHECK engine oil level before operating machine.
1.Place equipment on a level, firm surface that is free of rocks or other debris.
2.Place throttle in START position.
Throttle
3. Pull choke out (Honda engine only).
Choke
Part No 500402 | 7 | F020513A |