9GENERAL SAFETY

For your safety and the safety of others, these directions should be followed:

Do not operate this machine without first reading owner's manual and engine manufacturer's manual.

Use of Ear Protection is recommended while operating this machine.

Use of Eye and Breathing protection is recom- mended when using this machine, especially in dry

and dusty conditions. Optional bag cover directs dust toward ground, away from the operator.

·DO NOT place hands or feet inside nozzle intake opening, near debris outlet or near any moving parts.

·DO NOT start engine without hose and exhaust elbow connected firmly in place to housing and exhaust outlet.

·DO NOT operate without discharging exhaust into enclosed container.

·DO NOT operate during excessive vibration.

·DO NOT remove hose until engine has been turned off and has come to a complete stop.

·DO NOT operate machine with hose or exhaust elbow removed. ·DO NOT use this machine for vacuuming exclusively sand, dust, fine dirt, rock, glass, string like material, grain, rags, cans, metal, bark or water.

·DO NOT operate this machine on slopes greater than 20%. ·DO NOT pick up any hot or burning debris, or any toxic or explosive material.

·DO NOT allow children to operate this equipment.

10ASSEMBLY

Read all safety and operating instructions before assembling or starting this unit.

PUT OIL IN ENGINE BEFORE STARTING.

Your Billy Goat is shipped from the factory in one carton and is completely assembled except for the exhaust elbow, nozzle, handle loop for nozzle, hose booms, hose bands, hose coupler, hose clamps and related hardware.

1.ASSEMBLE exhaust elbow (item 10), to main unit and firmly tighten knobs (item 90), that are preassembled to main unit.

2.SECURELY ATTACH unit to tailgate of a truck or to a trailer, so that the exhaust discharges into an enclosed container.

3.ATTACH hose to hose coupler (item 24), using hose clamp (item

60)NOTE: This unit is equipped with a unidirectional hose. Assemble hose so that interior hose material seams face toward unit.

4. ASSEMBLE hose coupler to housing of main unit and securely tighten knob (item 13), that is preassembled to housing front plate.

5.ASSEMBLE nozzle handle loop (item 82), to nozzle handle using screw (item 80), washer (item 6) and lock nut (item 5). Adjust handle loop to desired height and angle and securely tighten in place.

6.ASSEMBLE nozzle handle (item 78), to nozzle (item 77), using screws (item 80), washers (item 79), washers (item 4) and lock nuts (item 5).

7.ATTACH assembled nozzle to hose using hose clamp (item 60). Before tightening hose clamp, position nozzle handle upward when hose is stretched to prevent twisting load on hose assembly during operation.

8.ASSEMBLE tube square boom (item 51), to boom pivot (item 50), using chain loop assembly (item 54), washers (item 4) and lock nut (item 52).

9.ASSEMBLE remaining chain loop assembly (item 54), to end of tube square boom (item 51) using washer (item 4) and lock nut (item 52).

10.SLIDE boom assembly into square tube on front of housing.

11.ASSEMBLE hose bands (item 56) around hose and onto chain loop assemblies on boom assembly using screws (item 55) and lock nuts (item 52) (see ADJUSTING HOSE BOOM on page 5).

11PACKING CHECKLIST

TR MODELS

Briggs & Stratton 11 HP

Honda 13 HP

HTR MODELS

Briggs & Stratton

Vanguard-Twin 18 HP

Per Model

Hose 8"x 12.5' TR

P/N 810523

Hose 10"x 12.5' HTR

P/N 810705

Handle Loop Nozzle

P/N 811019

Parts Bag &

Literature Assy

P/N 811128

Parts Bag

&Literature Assy

Engine

Manual Per

Model

These items should be included in your carton. If any of these parts are missing, contact your dealer.

10

51

50

56

59

60

78

77

Boxing Checklist

Check

Exhaust Elbow 811191

Boom Square Arm 810875

Boom Pivot WA 810870

Per Model

Band Hose Boom 8" (203mm) TR 810880 Qty. 2

Band Hose Boom 10" (254mm) HTR 810868 Qty. 2

Per Model

Coupler Weld Assy. 8"(203mm)

TR 811170

Coupler Weld Assy. 10" (254mm) HTR 811179

Per Model

Hose Clamps 8"(203mm) TR

810566 Qty. 2

Hose Clamps 10" (254mm) HTR

810706 Qty. 2

Handle Nozzle 811020

TR and HTR

Per Model

Nozzle 8"(203mm) TR 811007 Nozzle 10" (254mm) HTR 811005

Part No. 811202

Page 3 of 12

Form No. F022404A

Page 2 Page 4
Page 3
Image 3
Billy Goat HTR1803V specifications PUT OIL in Engine Before Starting, Exhaust Elbow Boom Square Arm Boom Pivot WA
Page 2 Page 4

HTR1803V specifications

The Billy Goat HTR1803V is a state-of-the-art hydrostatic drive debris loader that epitomizes efficiency and performance in outdoor maintenance. This machine is specifically engineered for those who require a robust solution for clearing leaves, grass clippings, and other organic debris from their properties. With a myriad of features and innovative technologies, the HTR1803V stands out in the competitive landscape of commercial debris loaders.

One of the main features of the HTR1803V is its powerful 18 HP Honda engine. This commercial-grade engine provides the necessary horsepower to tackle even the toughest debris, ensuring that the loader operates smoothly under various conditions. The hydrostatic drive system offers excellent maneuverability and speed control, allowing operators to navigate around obstacles with ease while working efficiently.

The HTR1803V is equipped with an exceptional 3-in-1 collection system. This feature allows for vacuuming, mulching, and blowing debris, providing versatility in how waste can be managed. The mulching capability reduces the volume of debris, allowing for easy disposal or composting, while the powerful vacuum effectively collects materials without clogging, even in wet conditions.

Notably, the HTR1803V comes with a durable and long-lasting steel housing that can withstand the rigors of daily use. Its robust design minimizes maintenance needs, which is a significant advantage for commercial landscapers and maintenance crews. Moreover, the easy-to-empty debris bag makes the process of disposal quick and hassle-free, thereby improving productivity on the job site.

Additional technologies incorporated into the HTR1803V include a user-friendly control panel that makes operation intuitive, even for those new to debris loaders. The adjustable height feature on the loader’s intake allows operators to customize their approach depending on specific landscaping requirements, making it adaptable for different environments.

In conclusion, the Billy Goat HTR1803V is a powerful and versatile debris loader that meets the demands of commercial landscaping and maintenance services. With a strong engine, advanced collection capabilities, and a durable construction, this machine exemplifies quality and innovation in outdoor equipment. It is designed to enhance productivity and streamline the process of debris management, making it an invaluable tool for professionals in the field.
Top Page Image Contents