MAINTENANCE

USE ONLY A QUALIFIED MECHANIC FOR

ANY ADJUSTMENTS, DISASSEMBLY OR

ANY KIND OF REPAIR.

WARNING: TO AVOID PERSONAL INJURY, ALWAYS TURN MACHINE OFF, MAKE SURE ALL MOVING PARTS COME TO A COMPLETE STOP.

DISCONNECT SPARK PLUG WIRES &

BATTERY CABLES BEFORE SERVICING

UNIT.

ENGINE: SEE ENGINE MANUFACTURER

OPERATOR'S INSTRUCTIONS.

RECONNECT ALL GUARDS GUARDS AND

HOSE BEFORE STARTING ENGINE.

USE ONLY BILLY GOAT ORIGINAL

EQUIPMENT PARTS FOR

REPLACEMENT AND REPAIR

GENERAL

Replace any worn or damaged parts as required.

DO NOT operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately. Remove spark plug wire and check for damaged impeller, loose impeller bolt, loose impeller key or lodged foreign objects. Refer to parts list (item 16) on page 11 for proper torque specifications.

IMPELLER REMOVAL

1.Wait for engine to cool and disconnect spark plugs from the both sides of the engine.

2.Disconnect the negtive battery cable (black) (item 12) from the battery.

3.Remove the hose coupler assy from the unit (item 36).

4.Remove the hose boom assembly.

5.Remove the intake housing assembly (item 33) using 1/2" socket and socket wrench to remove (12) locknuts and washers (item 60 & 63). Be careful to place intake assembly to the side without putting excess strain on safety switch wire harness

6.Remove impeller bolt and lock washer using 5/8" socket and impact wrench (see fig. 6).

7.Once bolt is removed impeller should slide out freely. If impeller will not slide free on crankshaft, obtain a 3/4"-10 x 3" bolt and thread it into the nut that is welded onto the center of the impeller and tighten slowly to push the impeller off the crankshaft.

Note: 3/4"-10 x 3" bolt is included in each impeller replacement kit or the bolt can be ordered from your local Billy Goat Dealer (part no. 790214).

8.When impeller is free of the engine shaft, align impeller with the opening and pull it straight out of the housing.

9.Using a new impeller bolt, washer, and lockwasher, reinstall new or repaired impeller in reverse order.

Note: Be sure spacer is in place behind impeller before tightening.

10. Tighten impeller bolt. Torque impeller bolt to [ 60 Ft. Lbs. (81.4 N.m)].

11. Repeat steps 2 through 5 in reverse order.

12. Reinstall spark plug wires.

ENGINE

Remove and Service foam air cleaner and inner air filter every 25 hours of use or every 10 hours or less for extremely dusty conditions (see engine manual).

Keep engine and engine cooling fins clean from dust and debris build-up.

When servicing engine refer to specific manufacturers engine owner's manual. All engine warranty is covered by the specific

engine manufacturer. If your engine requires warranty or otherFig. 6 repair work contact your local servicing engine dealer. When

contacting a dealer for service it is a good idea to have your engine model number available for reference(See table page 1). If you can not locate a servicing dealer in your area you can contact the manufacturers national service organization.

To reach:

KOHLER ENGINES: 800-544-2444

www.kohlerengines.com

Part No. 790294

Page 8 of 12

Form No. F111805B

Page 7 Page 9
Page 8
Image 8
Billy Goat QL2300KO specifications Maintenance, Impeller Removal, General, Engine
Page 7 Page 9

QL2300KO specifications

The Billy Goat QL2300KO is a powerful and versatile outdoor equipment designed for quick and efficient lawn care, particularly for those who manage large properties or commercial landscapes. This machine embodies the commitment to quality and durability that Billy Goat is known for, making it a preferred choice among professional landscapers and enthusiastic homeowners alike.

One of the standout features of the QL2300KO is its robust 230cc engine, which delivers ample power for tackling tough lawns and clearing debris. This engine is designed to be fuel-efficient while providing top-notch performance. The unit's recoil start mechanism makes it easy to fire up, ensuring that you can get to work with minimal downtime.

The QL2300KO’s cutting system is designed for precision. It features a 30-inch wide cutting deck that allows for efficient mowing, reducing the number of passes required. The deck is constructed from heavy-duty materials, designed to withstand the rigors of regular use while providing clean, even cuts. The cutting height is adjustable, allowing users to customize their mowing height to suit different grass types and preferences.

In terms of technology, the QL2300KO is equipped with advanced features that enhance its usability. Its swivel front wheel design provides excellent maneuverability, allowing for smooth navigation around landscaping obstacles. The ergonomic handlebar not only improves control but also ensures comfort during extended use, reducing operator fatigue.

Durability and ease of maintenance are also key highlights of the QL2300KO. The construction includes heavy-duty components that are built to last, alongside accessible maintenance points that simplify routine checks and servicing. This commitment to longevity ensures that the investment in a QL2300KO pays off over time with reliable performance.

Safety is a crucial aspect of the QL2300KO’s design, featuring a safety blade brake that stops the blades quickly when the operator releases the handle. This mechanism prevents accidents and ensures a safer mowing experience.

Overall, the Billy Goat QL2300KO is an exceptional outdoor tool that combines power, efficiency, and ease of use. Its blend of advanced features and rugged build makes it an ideal choice for professionals and homeowners looking to maintain their lawns and landscapes effectively. Whether dealing with overgrown grass or tackling debris, the QL2300KO is equipped to handle a variety of challenges, proving itself as a reliable partner in outdoor maintenance.
Top Page Image Contents