GENERAL SAFETY

For your safety and the safety of others, these directions should be followed:

Do not operate this machine without first reading

owner's manual and engine manufacturer's manual. Use of Ear Protection is recommended while

operating this machine.

Use of Eye and Breathing protection is recom- mended when using this machine, especially in dry

and dusty conditions.

·DO NOT place hands or feet inside nozzle intake opening, near debris outlet or near any moving parts.

·DO NOT start engine without hose and exhaust elbow connected firmly in place to housing and exhaust outlet.

.DO NOT allow children to operate this equipment.

·DO NOT operate without discharging exhaust into enclosed container.

·DO NOT operate during excessive vibration.

·DO NOT remove hose until engine has been turned off and has come to a complete stop.

·DO NOT operate machine with hose or exhaust elbow removed. ·DO NOT use this machine for vacuuming exclusively sand, dust, fine dirt, rock, glass, string like material, grain, rags, cans, metal, bark or water.

·DO NOT operate this machine on slopes greater than 45%(25°). ·DO NOT pick up any hot or burning debris, or any toxic or explosive material.

.DO NOT operate this unit freestanding. Unit must be secured in place during any operation.

ASSEMBLY

Read all safety and operating instructions before assembling or starting this unit.

PUT OIL IN ENGINE BEFORE STARTING.

BATTERY NOT INCLUDED WITH UNIT.

Your Billy Goat is shipped from the factory in one carton and is completely assembled except for the exhaust elbow, nozzle, handle loop for nozzle, hose boom, hose band, hose coupler, hose clamps and related hardware.

1.SECURELY ATTACH unit to the bed of a truck or to a trailer, so that the exhaust discharges into an enclosed container. NOTE: This unit must be securely mounted to the bed of a truck or to a trailer before operating.

2. ATTACH hose to hose coupler, using hose clamp (item 26) NOTE: This unit is equipped with a unidirectional hose. Assemble hose so that interior hose material seams face toward unit. Refer to flow direction arrow printed on outside of hose. When installed arrow should point toward vac housing.

3.ATTACH hose coupler w/hose to housing intake, that is preassembled to housing front plate, and rotate to lock it in place.

4.ASSEMBLE handle loop nozzle (item 45), to nozzle handle (item 44) using capscrew (item 52), and lock nut (item 60). Adjust handle loop to desired height and angle and securely tighten in place.

5.ASSEMBLE nozzle handle (item 44), to nozzle (item 25), using screws (item 52), washers (item 66), washers (item 68) and lock nuts (item 60).

8.ATTACH assembled nozzle to hose using hose clamp (item 26). Before tightening hose clamp, position nozzle handle upward when hose is stretched to prevent twisting load on hose assembly during operation.

9.ATTACH preassembled hose boom on top of housing using a hitch pin (item 10).

10.ASSEMBLE hose band (item 29) around hose and secure chain between flanges of the hose band using capscrew (item 85) and lock

nut (item 59) Repeat same steps on the other chain. (see ADJUST- ING HOSE BOOM on page 6).

11.SECURELY ATTACH exhaust elbow (item 21) capturing both flanges inside the clamp, then firmly tighten the clamp, securing the elbow to the housing (see MOUNTING on page 5).

12.ASSEMBLE battery (not included) by using battery bracket QL (item no. 70, hold down rods (item 71), washers (item 65), and lock nuts (item 59).

13.ATTACH red battery cable to + terminal and black battery cable to - terminal.

PACKING CHECKLIST

Denotes parts found in Parts Bag Assembly (shown on page 4).

These items should be included in your carton. If any of these parts are missing, contact your dealer.

NOTE: BATTERY IS NOT INCLUDED. REQUIRES 12 V BATTERY, 40 AH, 240 CCA MIN. U1 SERIES GROUP BATTERY FOR PROPER FIT

Parts Bag &

Literature

Assy

Engine

Manual Per

Model

Boxing Checklist

Check

Exhaust Elbow Assembly

Handle Loop Nozzle 811019

Handle Nozzle 811020

Nozzle 10" 811005

Hose Clamps 10" (254mm) 810706 Qty. 2

Hose Boom Assembly

Hose Coupler Assy

Parts Bag & Literature Assy 790319

Hose 10"x 12.5' 810705

KOHLER COMMAND PRO 23 HP

Band Hose Boom 10" (254mm) 810868 Qty. 2

Part No. 790321

Page 3 of 12

Form No. F050304B

Page 2 Page 4
Page 3
Image 3
Billy Goat QL2300KOEU specifications General Safety, Assembly, Packing Checklist
Page 2 Page 4

QL2300KOEU specifications

The Billy Goat QL2300KOEU is a robust pressure washer designed for both residential and commercial applications, making it an ideal choice for users who require high performance and durability. With a powerful Honda engine at its core, the QL2300KOEU delivers impressive cleaning capabilities, allowing it to tackle even the toughest grime and stains.

One of the standout features of the QL2300KOEU is its compact design, which ensures portability without sacrificing power. Weighing in at a manageable level, this pressure washer allows for easy maneuverability around driveways, patios, and large surfaces. The ergonomic handle and wheels provide added convenience, making it suitable for both casual users and professionals.

This model boasts an impressive maximum pressure of 2300 PSI, enabling effective removal of dirt, moss, and mildew from various surfaces. The inclusion of multiple nozzle types allows users to adjust the pressure to suit different cleaning tasks, from gentle washing of vehicles to heavy-duty cleaning of concrete surfaces. The Quick Connect feature makes switching nozzles easy, enhancing user experience.

Furthermore, the QL2300KOEU is equipped with a robust pump that is designed for longevity and efficiency. Built with high-quality materials, it minimizes the risk of leaks and maintains consistent pressure throughout the cleaning process. The pump also features an integrated thermal relief system that protects it from overheating, ensuring reliable operation even during extensive cleaning tasks.

Safety is paramount, and the QL2300KOEU includes several features to protect the user. The design incorporates a thermal relief valve to prevent overheating and a safety latch to avoid accidental start-ups.

The ease of maintenance is another notable characteristic of the QL2300KOEU. Its straightforward design allows for simple access to key components, making routine checks and servicing hassle-free.

In conclusion, the Billy Goat QL2300KOEU stands out as a powerful and efficient pressure washer, equipped with user-friendly features and advanced technologies. Its combination of performance, portability, and safety makes it a worthy investment for anyone in need of effective cleaning solutions, while its durable construction ensures it will withstand the test of time.
Top Page Image Contents