Manuals / Billy Goat / Household Appliance / Vacuum Cleaner

Billy Goat QL2300KOEU specifications Operation, PUT OIL in Engine Before Starting

Models: QL2300KOEU

1 12
Download 12 pages 58.37 Kb
Page 6
Image 6

OPERATION continued

STARTING

PUT OIL IN ENGINE BEFORE STARTING.

Inspect machine work area and machine before operating. Make sure that all operators of this equipment are trained in general machine use and safety.

ENGINE: See engine manufacturer’s instructions for type and amount of oil and gasoline used. Engine must be level when checking and filling oil and gasoline.

ENGINE SPEED: Controlled by throttle lever on the vac housing. Under normal conditions, operate at minimum throttle to accomplish your current cleaning task.

INTAKE HOSE: Hose mounting assembly must be properly attached to vac housing and safety switch must be engaged before engine will start. Note: Any damage to the switch or wiring harness will prevent engine from starting.

CHOKE: Located on the vac housing as part of the engine control panel.

THROTTLE: Move throttle control to fast position.

KEY SWITCH: Turn to start position until engine begins to fire, immediately release the key to the run position.

Note: Do not hold key in start position more than 10 seconds per attempt.

IF YOUR UNIT FAILS TO START:

See Troubleshooting on page 12. Also see engine owner's manual.

OPERATION

DO NOT OPERATE UNLESS

DEBRIS IS DISCHARGING

INTO AN ENCLOSED

CONTAINER

KEEP ENGINE CLEAN OF DEBRIS

EXHAUST DIRECTION & DISTANCE: Exhaust direction and distance are controlled by the angle of the exhaust deflector and by rotation of the exhaust elbow. Adjust the angle of the exhaust deflector to control the distance that debris is dis- charged. Typically debris is aimed to discharge to the rear of the container. The direction of discharge is adjusted by loosening the knobs on the exhaust elbow clamp and rotating the elbow to the desired direction.

NOTE: Elbow is heavy. Use caution when adjusting. Never stand directly under the elbow while adjusting direction of exhaust.

Never adjust exhaust deflector angle or direction of discharge while unit is running.

Never direct exhaust into an area where bystanders may cross the path of the debris.

INTAKE OPERATION: With machine running and fully assembled, move the nozzle in sweeping motions over debris. Always allow air to flow into the nozzle along with the debris. Do not completely block the nozzle when vacuuming, it will reduce performance, and increase clogging (See figure 3).

For removal of heavier debris, or debris that is stuck to the ground, rock nozzle forward to concentrate suction power around the debris (See figure 4).

Fig. 3

Fig. 4

HOSE CARE & USE TIPS

THE HOSE IS A REPLACEABLE WEAR ITEM.

FOR BEST HOSE OPERATION RESULTS, FOLLOW THESE RECOMMENDATIONS.

Be sure the hose is correctly installed by checking that the arrow printed on the hose indicating flow direction is pointing toward the vac housing.

Keep hose as straight as possible and avoid sharp bends during operation for best pick-up and to avoid clogs.

Never drag hose. Always remove and store hose before transporting unit.

Store hose straight and flat to maintain flexibility for next use.

To increase hose life, periodically rotate hose and reposition nozzle and coupler on front plate of unit. This increases hose life by keeping hose from wearing only on one side.

Part No. 790321

Page 6 of 12

Form No. F050304B

Page 5 Page 7
Page 6
Image 6
Billy Goat QL2300KOEU specifications Operation, PUT OIL in Engine Before Starting, If Your Unit Fails to Start
Page 5 Page 7

QL2300KOEU specifications

The Billy Goat QL2300KOEU is a robust pressure washer designed for both residential and commercial applications, making it an ideal choice for users who require high performance and durability. With a powerful Honda engine at its core, the QL2300KOEU delivers impressive cleaning capabilities, allowing it to tackle even the toughest grime and stains.

One of the standout features of the QL2300KOEU is its compact design, which ensures portability without sacrificing power. Weighing in at a manageable level, this pressure washer allows for easy maneuverability around driveways, patios, and large surfaces. The ergonomic handle and wheels provide added convenience, making it suitable for both casual users and professionals.

This model boasts an impressive maximum pressure of 2300 PSI, enabling effective removal of dirt, moss, and mildew from various surfaces. The inclusion of multiple nozzle types allows users to adjust the pressure to suit different cleaning tasks, from gentle washing of vehicles to heavy-duty cleaning of concrete surfaces. The Quick Connect feature makes switching nozzles easy, enhancing user experience.

Furthermore, the QL2300KOEU is equipped with a robust pump that is designed for longevity and efficiency. Built with high-quality materials, it minimizes the risk of leaks and maintains consistent pressure throughout the cleaning process. The pump also features an integrated thermal relief system that protects it from overheating, ensuring reliable operation even during extensive cleaning tasks.

Safety is paramount, and the QL2300KOEU includes several features to protect the user. The design incorporates a thermal relief valve to prevent overheating and a safety latch to avoid accidental start-ups.

The ease of maintenance is another notable characteristic of the QL2300KOEU. Its straightforward design allows for simple access to key components, making routine checks and servicing hassle-free.

In conclusion, the Billy Goat QL2300KOEU stands out as a powerful and efficient pressure washer, equipped with user-friendly features and advanced technologies. Its combination of performance, portability, and safety makes it a worthy investment for anyone in need of effective cleaning solutions, while its durable construction ensures it will withstand the test of time.