I)ON SWITCH Two-position switch:
(1) for starting the engine
(0) for switching off the engine
L)
WARNING
Select the required gear only after disengaging the forward clutch by releasing the relative lever (Fig. 1, ref. C).
7.ASSEMBLY INSTRUCTIONS FOR THE HANDLEBARS AND END PART OF THE CUTTING HEIGHT ADJUSTMENT LEVER
The turf cutter is delivered with the handlebars and the end part of the cutting height adjustment lever disassembled. Remove the cardboard packaging (to be disposed of in an appropriate manner, in accordance with current regulations in force).
To assemble proceed as follows :
Lift the handlebar (Fig. 3 Rif. C) and insert it in the supports shown in Fig. 3 rif. E. Select the required cutting height and secure the setting using the screws provided (Fig. 3 ref. D).
Fit the end part of the cutting height adjustment lever (Fig. 3 Ref. A) into its relative support (Fig. 3 ref. F) and secure using the screw provided (Fig. 3 Ref.B).
Figure 3
Before switching on ensure that the machine has been fully assembled correctly.
370406 | 11 | F103104A |
