Volume settings

page 6 SETTINGS

To go into Settings mode, press the SET button. Then pressing the PLAY/PAUSE/STOP button takes you through a number of options, as shown:

page 7 SETTINGS

Setting the security code

You need a three-digit security code in order to

IN SETTINGS MODE, PRESS

operate the answering machine remotely.

DAY AND TIME

pause

stop

pause

stop

NUMBER

OF RINGS

RINGER

ON/OFF

pause

stop

pause

stop

SECURITY

CODE

VOLUME

pause

stop

to change the value of the

memo current setting, step by step. Wait for a prompt between each key press.

to leave Settings mode, saving any changes you have made

to leave Settings mode without saving any changes

The default security code is 123. You can change it to any other three-digit code you will easily remember.

1Press

2Press the PLAY/PAUSE/STOP button twice The Celestia says: ‘Set security code’.

OGM

CALL # 03 09:35AM13-10 MSG02/05

00-16

del

3 Press memo or

to set the first digit. Press PLAY/PAUSE/STOP

	Setting the time and date			This is OPTIONAL — if you do not set
				the time and date, the Celestia 400 will
				automatically take its settings from the
1	Press	— the Celestia says: ‘Set day and time’		network when it answers a call.
1	Press	— the Celestia says: ‘Set day and time’
2	Press	memo or	to change the hour setting (01 to 12)

Each time you press the button, you change the value by one hour; the Celestia speaks the number. When you reach the correct setting, move to the next step …

3Press the PLAY/PAUSE/STOP button

4 Press memo or

to change the minute setting (00 to 59). Press PLAY/PAUSE/STOP

4	Press	memo	or	to set the second digit. Press PLAY/PAUSE/STOP
5	Press	memo	or	to set the third digit. Press PLAY/PAUSE/STOP
	The Celestia tells you the security code you have set.
6	Press		to save the new setting and leave Settings mode
	OR press			to leave Settings mode without saving any changes


	OR press PLAY/PAUSE/STOP to move on to setting the security code

5	Press memo		or	to switch between am and pm. Press PLAY/PAUSE/STOP
6	Press	memo	or	to change the date setting (01 to 31). Press PLAY/PAUSE/STOP
7	Press	memo	or	to change the month setting (01 to 12). Press PLAY/PAUSE/STOP
8	Press	memo	or	to change the day setting (Monday to Sunday)

9Press to save the new setting and leave Settings mode

OR press to leave Settings mode without saving any changes

OR press PLAY/PAUSE/STOP to move on to setting the number of rings

You can adjust the volume of the loudspeaker during a

call or during message playback by pressing or

You can adjust the volume of the ringer by pressing or while the Celestia 400 is ringing.

The new setting will apply the next time a call comes in.

You can also adjust the volume of the loudspeaker, the ringer and the beeper in Settings mode, as follows.

As you change the beeper and ringer volumes, the Celestia 400 plays a demonstration.

09:35AM13-10 MSG02/05

-6 -3 -5

Loudspeaker	Beeper	Ringer
volume	volume	volume

All volumes have a range from 1 to 9, with a default setting of 5.

Setting the number of rings This is the number of rings before the Celestia 400 will answer a call when the answering machine is switched on.

1Press then PLAY/PAUSE/STOP — the Celestia says: ‘Set number of rings’.

2	Press memo	or	OGM
			to change the number of rings (2 to 9 and TS*)
			CALL # 03 09:35AM13-10 MSG02/05
3	Press	to save the new setting and leave Settings mode		00-16

	OR press		to leave Settings mode without saving any changes


	OR press PLAY/PAUSE/STOP to move on to setting the security code

*TS is Toll Saver, which saves you paying for an unnecessary call if you dial in to check your messages remotely. If there are new messages, the Celestia will answer your call after two rings; if there are no new messages, it will answer after four rings.

1Press