Binatone 5 Telephone operation continue, To end a call, Inserting a Pause in the dialing sequence

Telephone operation continue...

To adjust the speakerphone volume

During a call:

Adjust the volume of the speakerphone to your comfortable volume level using the SPEAKERPHONE volume switch located on the right side of the Base unit.

To end a call

To switch between the Handset and the Speakerphone

To mute the mouthpiece or microphone

1

2

Inserting a Pause in the dialing sequence

Replace the Handset on the Base unit cradle, or press SPEAKERPHONE button on the Base unit.

ÖThe SPEAKERPHONE light indicator will turn OFF.

During a phone conversation through the Handset, press the SPEAKERPHONE button to speak hands-free. Replace the Handset on the Base unit cradle.

While in speakerphone mode, lift the Handset to enable a private conversation.

During a call, the phone mutes the microphone or the mouthpiece so that the person on the other end cannot hear you.

Press MUTE button once.

ÖWhile the microphone is muted, MUTE will be shown on the lower left corner of the display.

Press MUTE button again to get back to the call.

For some switchboard systems, an access number must be dialed (usually an 8 or 9) to get another dial tone and an outside line. Pressing REDIAL/PAUSE button immediately after the access number, a pause of about 3.6 seconds will be entered, and the desired number can be dialed immediately.

Press REDIAL/PAUSE button to insert a pause when dialing or storing Long Distance Access Codes.

11