Descriptions see /4, Safety Precaution

BAP422IUK04EM1 Visual.qxd 3/12/04 3:12 AM Page 7

U.K. and IRELAND

PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS.

With proper care and use, this Bionaire™ air purifier will give you fresh, clean air for many years.

NOTE: Before reading these instructions, please view the corresponding illustrations.

DESCRIPTIONS (SEE FIG 1/4)

A. Inlet Grill

B. Washable Foam Pre-Filter

C.HEPA/Carbon Filter

D.Filtered Air Outlet

E. Filter Indicator Light

F. Reset Button

G.Ionizer Light

H.Ionizer Control

I.Speed Control

J.Power Light

SAFETY PRECAUTION

Carefully read and retain all instructions before using the air purifier.

•To avoid fire or shock hazard, check that the voltage on the product corresponds to your electricity supply and plug directly into an electrical outlet.

•To avoid fire hazard, never put the cord under rugs, or near any heat source.

•Carefully discard any plastic wrapping that was used for the packaging.

•Do not use the air purifier outside.

•Do not place the unit near any heat source or in direct sunlight.

•Always unplug the air purifier before removing the grill, changing the filters, cleaning the air purifier or whenever it is not in use.

•Do not use in or around water or any other liquids. Do not attempt to wash the unit under running water.

•Use appliance only for intended household use as described in this manual.

•Ensure that all air openings are not restricted or covered in any way.

•Do not place anything on top of the unit.

•Never insert any object into any openings.

•Do not use the air purifier if any part is missing or damaged in any way.

•Do not attempt to repair or adjust any mechanical functions of this unit. If the unit becomes damaged return to the place of purchase or phone the helpline number on the back of this leaflet.

•If the supply cord or plug is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid hazard.

•The air purifier contains no user serviceable parts and should the product suffer damage or breakdown it must be returned to the manufacturer or its service agent.

•Should the air purifier stop working, first check the fuse in the plug (UK only) or fuse/circuit breaker at the distribution board is operating, before contacting the manufacturer or service agent.

HOW THE AIR PURIFIER WORKS

Dirty, dust laden air is drawn through the back of the air purifier and through the multi-stage filtration system.

1.The carbon filter will help clear odours making the air cleaner and fresher.

2.The HEPA filter entraps 99% of all smaller visible and non-visible particles down to 2 microns in size.

PRODUCT FEATURES

Filter Life Indicator

Your air purifier has an indicator light that illuminates when its time to change the filters.

Ioniser

Your Bionaire™ Air Purifier has an independently controlled ioniser, which when turned on, releases negative ions into the outgoing filtered air. Ions are tiny particles that carry either a positive or negative charge. These ions exist naturally all around us in the air, water and ground. Both positive and negative ions are colourless, odourless and completely harmless.

Negative ions help the air purification process by attaching themselves to very small airborne particles in the room. These particles take on a negative charge and may join with positively charged particles, such as dust, pollen, smoke and pet dander to form larger particles that are then more readily captured by the filter system, or they may be attracted to positively charged surfaces like walls or floors.

You may also note, after extended use, that dust may have collected around the grills or front panel.

This is from the ionisation effect caused by the negative ions exiting from the air outlet.This dust does not come from the air output, but is drawn out of the uncleaned air going past the air outlet.

This is additional evidence of the air cleaning effectiveness of negative ions. The dust can be easily removed with a clean, dampened cloth or soft brush.

NOTE: it is important to change the HEPA filter at recommended intervals. Using the ioniser in conjunction with dirty filters may result in dirty

particles exiting the air purifier and being attracted to walls, carpets, furniture and other household objects. These dirty particles may prove very difficult to remove.

PRE-OPERATING INSTRUCTIONS

1.After removing the unit from the box, remove the plastic covering from the unit.

2.Select a firm level place where there are no obstructions to the air inlet (front grill) or filtered air outlet.

3.Remove the inlet grill by pulling the grill towards you.

4.Remove both HEPA filters by gripping on both sides and pulling forward.

5.Remove protective plastic bag from each filter cartridge. The filter clip can only be attached to the hang tabs on the filter one way (see fig 3). The filter clip should easily slide onto the filter hang tabs. Do not use force whilst attaching the filter clip to the filter. Align the clip on the HEPA filter with the rails on the inside of the unit.

NOTE: The pleated material and rubber gasket should be facing towards the unit when applied.

6.Replace the inlet grill by sliding back on to the unit. Make sure that it snaps securely into position (the grill only goes on one way).

NOTE: Do not point outlet towards wall.

OPERATING INSTRUCTIONS

1.Plug into a suitable 220 – 240V electrical outlet.

2.Select the required operating Speed: Hi ( ),

Medium ( ), Low ( ) by sliding the switch to the appropriate setting.

3.To release negative ions into the filtered air

slide the Ioniser button ( ) to ON. The amber light will illuminate.

4.The ioniser will not work unless the unit is running.

5.For optimum air filtration, it is recommended to operate the air purifier continuously. Its rugged motor is designed to give many years of service.

6.For continuous use it is recommended to operate the air purifier at the Medium ( ) setting. For quieter operation or use in a bedroom, select


the Low (	) setting. When high levels of air
pollution are present, select the HI (		) setting
to quickly circulate clean filtered air.

CLEANING AND MAINTENANCE

1.Turn the air purifier off and unplug it before cleaning.

2.The outside of the air purifier can be cleaned with a soft, clean dampened cloth.

3.The filtered air outlet can be cleaned of dust with a small, soft brush.

4.If you wish to clean the inside of the air purifier, please only use a dry, soft cloth to wipe it down.

FILTER REPLACEMENT

IMPORTANT: IN ORDER TO RETAIN THE EFFICIENCY OF YOUR AIR PURIFIER, THE HEPA FILTER NEEDS TO BE CHANGED EVERY 6 MONTHS.

1.Every few weeks check the condition of the pre-filter.

2.Remove the inlet grill. If the foam pre-filter has collected a noticeable amount of dust, remove it from the inlet of the grill and wash it in warm soapy water. Rinse and dry the pre-filter thoroughly before replacing it in the inlet of the grill.

3.With the inlet grill removed, remove the HEPA cartridge and dispose in the dustbin. DO NOT try to wash and re-use the HEPA filter. Replace with a new HEPA filter-BAPF30 removing the protective plastic bag before inserting into the air purifier.

4.Align the clips on the side of your HEPA filter with the rails on the inside of the unit. Gently slide the filter onto the rails.

5.The filter clip should easily slide onto the filter hang tabs. Do not use force while attaching the filter clip to the filter. Align the clip on the side of your HEPA filter with the rails on the inside of the unit.