Bionaire CP0260 manual Special Maintenance Heating Element, After Season Care

Models: CP0260

1 11
Download 11 pages 3.74 Kb
Page 9
Image 9
Figure 8
Heating Element

5.Disinfect the water tank and tray using a solution of one teaspoon of chlorine bleach in 1 gallon of water. Let solution soak for 20 minutes, swishing every few minutes to wet all surfaces. Empty the tank and tray; rinse thoroughly until bleach smell is gone. Replace the tray in the base (Figure 7), then replace the misting chamber in the unit, making sure that the latch has been locked in position. Fill the

tank with fresh water and replace it into the unit.

6.Resume normal use.

SPECIAL MAINTENANCE - HEATING ELEMENT

Should the output drop or the “EMPTY/CLEAN” light illuminate with water remaining in the tank, it will be necessary to remove scale buildup on the heating element. Remove the misting chamber by rotating the latch

and lift it from the unit’s base. Place the misting chamber on its side. The heating element will now be visible (Figure 8). Using a non-metallic brush, scrape away the scale buildup on the element. Follow steps 3-6 to complete cleaning.

Note: The above special maintenance is required due to water hardness. The harder your water, the more often this special maintenance will be needed.

AFTER SEASON CARE

If you do not plan to use your humidifier for an extended period of time (i.e. during the summer months), it is important that you follow these instructions to help prevent stagnation of water in the unit.

1.Clean your humidifier as instructed in the section titled “Cleaning and Maintenance”.

2.Make sure all water is emptied from the tank and tray.

3.Dry your unit thoroughly.

4.Leave the tank cap off allowing the tank to be exposed to air.

5.Store humidifier in a cool, dry location. Bionaire® recommends storing the unit in its original box.

8

Page 9
Image 9
Bionaire CP0260 manual Special Maintenance Heating Element, After Season Care