Black & Decker DK35 Pouring boiling water, Cleaning and maintenance, Technical data, English

Models: DK35

1 22
Download 22 pages 26.07 Kb
Page 6
Image 6
Pouring boiling water

ENGLISH

To switch the appliance off during boiling, push the On / Off switch (2) the off position

(O).

If you do not want to use the boiled water immediately, the kettle may be left on the base. If you want to bring the water back to boil after a while, push the on / off switch (2) to on again.

Pouring boiling water

Make sure the appliance is switched off.

Take the kettle off the base.

To avoid scalding, tilt the kettle slowly to pour the boiled water.

After pouring, place the kettle back on the base and remove the plug from the socket.

Cleaning and maintenance

Before cleaning and maintenance, remove the plug from the socket and allow the appliance to cool.

Warning! Before cleaning and maintenance, switch the appliance off, remove the plug from the socket and allow the appliance to cool.

Warning!Do not immerse the appliance, the base, the cord set or the plug in water or any other liquid.

Wipe the exterior with a damp cloth.

Do not use scouring pads.

If necessary, use a mild detergent to remove spots.

Do not use any abrasive or solvent based cleaner.

Do not immerse the appliance in water or any other liquid.

Technical data

 

DK35

Voltage

220 – 240 Volts

Supply

50/60 Hz

Power consumption

2500-3000W

Cable length

0.67 metres

Capacity

1.7 Litres

 

 

Weight

1.2 kg

 

 

6

Page 6
Image 6
Black & Decker DK35 manual Pouring boiling water, Cleaning and maintenance, Technical data, English