Bissell 10M2 warranty Cleaning the pre-motor filter

Maintenance and care

Cleaning the pre-motor filter

The pre-motor filter protects the motor from dirt and dust particles. Use only BISSELL replacement filters in your Zing

1.Remove the dirt cup from the vacuum, following steps 1-3 of Emptying the dirt cup on page 8.

2.The pre-motor filter is located between the power button and the automatic cord rewind button.

3.The pre-motor filter can be hand washed in cold water with a mild detergent. Rinse well and air dry completely before placing back into the vacuum.

NOTICE:

This product is intended for house- hold use only and not for commer- cial or industrial use. Vacuuming of dust from products like plaster, concrete or ashes will damage the motor and void the warranty.

3.

Washable

Pre-Motor

Filter

Tip:

For maximum cleaning performance, check the filters often and clean or replace if necessary.

10 w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1