Operations

Power cord

The power cord is located at the rear of the vacuum. Gently pull out the power cord, watching for the yellow line. Stop pulling the power cord once the yellow line is visible. There is also a red line, which indicates the end of the usable cord. Do not pull the power cord out beyond the red line.

Automatic cord rewind

Your vacuum is equipped with an automatic cord rewind. When cleaning is finished, press the power button OFF and grasp the plug to disconnect from the electrical outlet. Hold the plug and press the automatic cord rewind button to rewind the cord automatically.

Automatic Cord

Rewind Button

CAUTION:

Be careful to avoid injury as cord retracts very quickly.

Power Button

Power button

Turn the power ON or OFF by pressing lightly downward on the power button ( ).

caution:

Before using your vacuum, make sure that the dirt cup and all filters are in place.

Do not operate your vacuum without the dirt cup and filters.

6 w w w . b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

Page 6
Image 6
Bissell 10M2 warranty Operations, Power cord, Automatic cord rewind, Power button