Maintenance and care

Clearing clogs from the dirt cup

1.Unplug the vacuum from electrical out- let.

2.Remove the dirt cup from the vacuum, following steps 1-3 of Emptying the dirt cup on page 8.

3.Remove the dirt cup filter assembly from the dirt cup, following step 2 of Clean the dirt cup filter on page 9.

4.Tap the dirt cup filter assembly over a garbage container to remove any dirt or debris from the dirt cup filter screen that surrounds the dirt cup filter.

5.Reach up into the dirt cup to clear any dirt or debris from the dirt cup.

6.Check to see if there are any clogs in the suction inlet.

7.After clearing any dirt or debris from the dirt cup, replace the dirt cup filter assembly back in the dirt cup follow- ing step 8 of Cleaning the dirt cup filter on page 9.

12 w w w . b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

Page 12
Image 12
Bissell 10M2 warranty Clearing clogs from the dirt cup