Bissell 1620 warranty Normal Cleaning, Plug the PowerLifter Plus into a proper outlet and turn

Normal Cleaning

Plug the PowerLifter Plus into a proper outlet and turn the

1. Power Switch ON. Set the ReadyTools Dial to FLOORCLEANING

While pressing the Spray Trigger, make one slow forward

2. and back wet pass. Let the BISSELL Deep Cleaning Formula and DirtLifter PowerBrush do the work for you.

Caution: Do not overwet.

NOTE: Do not run over loose objects or edges of area rugs. Stalling brush may result in premature belt failure.

Release the Spray Trigger and make one slow forward and back

3. pass over the same area to remove any residual dirty water.

Repeat cleaning passes without pressing the Spray Trigger

4. until water is no longer being suctioned up through the FLOOR NOZZLE window.

NOTE: Both the SmartMix Bottle and Tank-in-Tank must have liquid in them in order for the machine to spray. If one tank is empty the machine will not apply either cleaning solution or water.

After cleaning, you may want to turn the SmartMix Dial to

5. WATER ONLY to give your carpeting a final rinse. This will ensure thorough removal of embedded dirt loosened by the Deep Cleaning Formula. BISSELL Deep Cleaning Formulas contain a Scotchgard agent that helps your carpets repel dirt and keeps them looking good longer.

When cleaning job is complete, refer to the

6. Maintenance/Storage section on pages 12-13.

Tip:

Thorough vacuuming before deep cleaning will prevent early clogging of the lint trap.

When filling bottle storing unit, set

Dial to:

10