![](/images/new-backgrounds/1063545/6354533x1.webp)
Troubleshooting
WARNING:
To reduce the risk of fire, electric shock, or injury, unplug machine from outlet before servicing.
Reduced spray or no spray.
Possible Causes
1Bladder may be empty
2SmartMix may be empty
3The lint screen may be clogged
4
5Pump may have lost prime
6The Pump Belt may be broken
Lift Here
Insert
Screwdriver
Blade Here
Remedies
1Turn power OFF, refill tank with hot tap water.
2Refill bottle with formula.
3Turn power OFF, clean out lint screen, follow step 2 on page 8.
4Turn power OFF; remove and reseat tank.
5Turn power OFF; after 1 minute, turn ON and depress Spray trigger.
6Turn power OFF and unplug machine from outlet. To check if a Pump Belt has broken, you will need a flathead screwdriver. Insert the blade
end into the lower slot of the Belt Access Door to release the latch.
If necessary, insert the blade end into the upper slot to release the upper latch. Examine for belt breakage. You should be able to see the Pump Belt looped around the motor shaft. If it is broken or missing, please refer to the part numbers and descriptions on page 19 before calling BISSELL Consumer Services. Complete installation instructions will accompany the replacement belt.
DirtLifter PowerBrush does not turn.
Possible Causes
1The Brush Belt or Pump Belt may be broken
Remedies
1Turn power OFF and unplug machine from outlet. To check if a Brush Belt has broken, you will need a flathead screwdriver. Insert the blade
end into the lower slot of the Belt Access Door to release the lower latch. If necessary, insert the blade end into the upper slot to release the upper latch. Examine for belt breakage. If broken, refer to pages