Bissell 1720 warranty Deep Cleaning Upholstery

Deep Cleaning

Place the tool directly on soiled surface at arms length. Apply

1. downward pressure on the tool and pull toward you, while pulling trigger to spray cleaning solution.

Note: If using the TurboBrush, the switch should be in the “BRUSH” position. This activates the brush only.

Repeat, keeping the tool firmly against the surface. Continue

2. until no more dirt can be removed. Do not overwet.

Note: If using the Turbobrush, move the switch to the “SUCTION” position. This activates the suction to remove the dirt and cleaning solution. Move the switch back to the “BRUSH” position for additional brushing action.

Do not overwet.

Release spray trigger. Vacuum area until no more cleaning

3. solution can be removed.

Note: If using the Turbobrush, move the switch to the “SUCTION” position. This activates the suction to remove the dirt and cleaning solution.

If the tool stops spraying, turn OFF Power Switch and check

4. cleaning solution level. Refill if needed. Never run dry.

Deep Cleaning Upholstery

Check the manufacturer’s tag before cleaning. “W” or “WS” on

1. the tag means you can use your Little Green. If tag is coded with an “S” (with diagonal strike-through), or says “Dry Clean Only,” do not proceed.

If manufacturer’s tag is missing or not coded, check with your

2. furniture dealer.

If possible, check upholstery stuffing. Colored stuffing may

3. bleed through fabric when wet.

SUCTION BRUSH

Tip:

Deep cleaning stairs and high traffic areas on a regular basis can prolong carpet life.

Tip:

Check upholstery stuffing before cleaning. Colored stuffing may bleed through fabric when wet.

8