![](/images/new-backgrounds/1062803/6280319x1.webp)
Troubleshooting
Cleaner won’t run. |
|
Possible Causes | Remedies |
WARNING:
To reduce the risk of injury from moving parts and/or electrical shock, turn Power Switch OFF and disconnect polarized plug from electrical out- let before performing troubleshooting checks.
Power Unit not plugged in | Check electrical plug | |
Blown fuse/tripped breaker | Replace household fuse or Reset | |
| Breaker | |
Reduced spray or no spray | Call BISSELL Consumer Services | |
|
| |
Possible Causes | Remedies |
|
Spray Nozzle clogged | Clean Spray Nozzle | |
Solution Tank empty | Check/Refill Tank | |
Solution Tank outlet clogged | Clean outlet at bottom of Solution Tank | |
Pump needs priming | Push firmly on Solution Tank front | |
| while depressing Spray Trigger | |
Vacuum won’t pick up cleaning solution | ||
Possible Causes | Remedies |
Poor Upholstery/Carpet Tool position
Collection Tank is full Upholstery/Carpet Tool Brush worn Excess solution in Vacuum Flex Hose
Incorrect switch position on TurboBrush
Reposition Upholstery/Carpet Tool on surface, follow recommended cleaning procedures
Empty Collection Tank Replace with new Brush
Lift Tool and point upwards to allow water in Hose to flow into the Collection Tank Reposition switch to “Suction” Position
| Excessive Foam in the Collection Tank | Remedies |
| |
| Possible Causes | |||
| Residue left in carpet or fabric | Flush carpet by using clear water in | ||
| form prior cleaning | Solution Tank | ||
|
| Check Tank often/empty as necessary | ||
| Incorrect cleaning formula | Use BISSELL Little Green formula only | ||
| TurboBrush | |||
| Possible Causes | Remedies |
| |
| Incorrect switch position on TurboBrush | Reposition switch to “Brush” position |
10