How to use this guide
This User’s Guide has been designed to help you get the utmost satisfaction from your BISSELL EASY VAC™ Bare Floor and Carpet Vacuum. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions.
Please read this Guide thoroughly before assembling your vacuum cleaner. Pay particular attention to the assembly diagram, assembly instructions, and part names. Locate and organize all parts before assembly. Familiarize yourself with the parts and where they go. Following this User’s Guide will greatly enhance your ability to get the best performance from your BISSELL EASY VAC™ for many years.
Your EASY VAC™ comes in four, easy to assemble components. No tools are needed.
Detachable Canister Handle
Lightweight Detachable Canister
Floor Nozzle
Crevice Tool
How to put it together
1.Attach Upright Handle to Canister Vacuum
Gently slide Handle over square end of Canister Vacuum, pushing until buttons on Canister snap into place in opening on Handle. The Handle is designed to attach and disassemble easily as you switch from upright to canister style cleaning.
WARNING:
Do not plug in your vacuum cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operating procedures.
2.Attach Floor Nozzle to Canister Vacuum
Grasp Floor Nozzle with one hand, while holding Canister Vacuum firmly with the other. With firm, even pressure, press Floor Nozzle into round opening at end of Canister Vacuum. Continue pressing gently but firmly until Floor Nozzle can go no further. As with the Upright Handle, the Floor Nozzle is designed to attach and disassemble easily as you switch from level floor to tool style cleaning.
3.Attach Crevice Tool to Tool Clip
Slide narrow end of Crevice Tool over angled post on the side of the Canister, then press round end of Tool into
EASY VAC™ assembly is now complete.
4
