How to use your BISSELL EASY VAC™
Power Cord Quick Release
The Power Cord is stored at the side of the Canister, looped around two Cord Wraps. A molded clip on the polarized plug allows it to be clipped to the Power Cord during storage.
1. Remove the plastic plug guard and dispose or recycle it.
2. Unclip polarized plug from Power Cord.
3. Rotate the Upper Cord Wrap | Upper and |
right or left, and slip Power Cord from Upper | Lower Cord |
Wraps | |
and Lower Cord Wraps. |
|
4. Connect Power Cord Plug with a polarized outlet. 5. To keep the Power Cord out of your way while
cleaning, place it in the cord hook at the top/back of the handle.
Power Switch
The Power Switch is located just below the hand grip. Move the switch to position “ ” [down] to vacuum, and “ ” [up] to turn unit off when cleaning is complete.
Upright floor cleaning
Floor Nozzle Adjustment
You can adjust the brush on the underside of the Floor Nozzle to clean | |||
bare floors or carpeted areas. | Floor Nozzle | ||
1. Move the lever on the Floor Nozzle to | |||
Adjustment Lever | |||
the left ( | ) for bare floor vacuuming, |
| |
and the brush will adjust to slight | BARE FLOOR CARPET | ||
variations in floor height. |
|
2.Move the lever to the right ( ) and the brush will lock in position for more effective cleaning of carpeted surfaces.
Cleaning with the Canister
Your BISSELL EASY VAC™ is not only a convenient upright bare floor and carpet cleaner, it’s also a versatile floor/above floor vacuum cleaner when you detach the lightweight canister.
Floor Cleaning
1.Detach the Upright Handle by pressing your thumb and forefinger on the lock buttons on Canister (using a “pinching” motion) while gently pulling Handle off square end of Canister.
2.For floor surface cleaning, use the Floor Nozzle, following the surface adjustment instructions.
3.For edge cleaning or cleaning small areas, you need only to:
■Detach the Hose from the Hose Port at the bottom/ back of the Canister. Press the lock button and pull the Hose from the Port, then insert the Crevice Tool into the end of the Hose. The Crevice Tool also can be placed in the round opening of the canister for added versatility.
Index
Safety instructions . . . . . . . . . .2 Product view . . . . . . . . . . . . . . .3 How to put it together . . . . . . . .4 Index . . . . . . . . . . . . . . . . . . . . .5
How to use your
BISSELL EASY
5