Troubleshooting
Vacuum cleaner won’t run
Possible causes
1.Vacuum cleaner is not plugged in
2.Power button is not pressed down
WARNING:
To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting.
Remedies
1.Check electrical plug
2.Press power button down
Vacuum cleaner won’t pick up or low suction
Possible causes
1.Tools, flex hose and/or telescoping extension wand are blocked
2.Filters are dirty
3.Dust bag is full
4.Swivel hose not securely attached to suction opening
5.Crack or hole in flex hose
6.Variable suction power control is set to minimum setting
Remedies
1.Remove each part and check for blockages
2.Check and clean or replace
3.Replace with new dust bag
4.Make sure swivel hose is locked into suction opening
5.Check hose and replace if needed
6.Change to maximum setting
Visible dust escaping from vacuum
Possible causes
1.Dust bag is full
2.Filters missing or installed incorrectly
3.Filters are dirty
4.Flex hose is blocked
5.Swivel hose not securely attached to suction opening
6.Crack or hole in flex hose
Remedies
1.Replace with new dust bag
2.Check
3.Check and clean or replace
4.Remove hose and check for blockages
5.Make sure swivel hose is locked into suction opening
6.Check hose and replace if needed
Other maintenance or service not included in the manual should be per-
formed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
10w w w . b i s s e l l . c o m
