Assembly
1.Connect swivel hose by firmly inserting it into the suction opening on the canister. The hose will click into place when correctly inserted.
2.Connect telescoping extension wand to the handle end of the flex hose. Twist slightly to tighten.
3.Connect floor nozzle to the end of the telescoping extension wand. Twist slightly to tighten.
4.To extend telescoping wand, press down on the black button, in the direction of the arrows, with one hand and firmly grasp and pull out extending portion
of the wand to desired length with the opposite hand.
5.Once assembled, you can store your vacuum in one of two positions:
A.Storing in the
To store with the floor nozzle attached, insert the storage clip (located on the back of the floor nozzle) into the storage slot on the rear of the vacuum.
B.Storing in the upright position:
To store with the floor nozzle attached, stand the vacuum in the upright position and insert the stor- age clip (located on the back of the floor nozzle) into the storage slot on the bottom of the vacuum.
WARNING:
Plastic film can be danger- ous. To avoid danger of suf- focation, keep away from babies and children.
12
3
Storing in the 
Storing in the upright position B.
5
w w w . b i s s e l l . c o m
