0perations
Power cord
The power cord is located at the rear of the vacuum. Gently pull out the power cord, watching for the yellow line. Stop pulling the power cord once the yellow line is visible. There is also a red line, which indicates the end of the usable cord. Do not pull the power cord out beyond the red line.
Automatic cord rewind
Your vacuum is equipped with an automatic cord rewind. When cleaning is finished, press the power button OFF and grasp the plug to disconnect from the electrical outlet. Hold the plug and press the automatic cord rewind button to rewind the cord automatically.
Power button
Turn the power on or off by pressing lightly downward on the power button ( 
).
Special tools
Your BISSELL PurePro is not only a powerful carpet and rug vacuum cleaner, it’s also a versatile bare floor vacuum cleaner and above floor vacu- um cleaner when you select one of the special tools.
Floor nozzle:
Use to vacuum carpets, rugs and bare floors. Swivel head turns to get into tight spaces and fits under cabinets.
1.To vacuum carpets and rugs, push the
brush switch to the carpet position
. This will pull the brushes up into the floor nozzle.
2.To vacuum bare floors, push the brush
switch to the bare floor position . This will extend the brushes down from the floor nozzle.
Upholstery tool:
Use the upholstery tool to clean curtains, draperies, cushions and fabrics.
NOTE: Use the air flow regulator to reduce air flow as needed when using the upholstery tool.
Automatic Cord
Rewind Button
CAUTION:
Be careful to avoid injury as cord retracts very quickly.
Power Button
CAUTION:
Before using your vacuum, make sure that the dust bag and all filters
without the dust bag and filters.
1. | Brush Up |
|
Brush Down
2.
6w w w . b i s s e l l . c o m
