Bissell 33N7 warranty Assembling your vacuum, clip located on the back of the floor

Assembling your vacuum

1.	Connect swivel hose by squeezing both locking
	buttons and inserting it into the suction opening on
	the canister. Once the swivel hose is inserted in the
	suction opening, release the locking buttons.
2.	Connect telescoping extension wand to the handle
	end of the flex hose. Twist slightly to tighten.
3.	Connect Pet Hair Eraser floor nozzle to the end of
	the telescoping extension wand. Twist slightly to
	tighten.
4.	Once assembled, you can store your
	vacuum in one of two positions:
	A.	Storing in the in-use position:
		1.To store with the Pet Hair Eraser floor
		nozzle attached, insert the storage clip
		(located on the back of the floor nozzle)
		into the storage slot on the rear of the
		vacuum.
		2.To store without the Pet Hair Eraser floor
		nozzle attached, insert the storage clip
		(located on the bottom of the
		telescoping extension wand) into the
		storage slot on the rear of the vacuum.
	B.	Storing in the upright position:
		1.To store with the Pet Hair Eraser floor
		nozzle attached, stand the vacuum in the
		upright position and insert the storage
		clip (located on the back of the floor
		nozzle) into the storage slot on the
		bottom of the vacuum.

2.To store without the Pet Hair Eraser floor

nozzle attached, stand the vacuum in

the upright position and insert the storage clip (located on the bottom of the telescoping extension wand) into the storage slot on the bottom of the vacuum.

Warning:

Plastic film can be dangerous. To avoid danger of suffocation, keep away from babies and children.

1.2.

3.

Storing in the in-use position

A1.A2.

Storing in the upright position

B1.B2.

w w w . b i s s e l l . c o m

165