Bissell 33N7 Pet Hair Eraser Floor Nozzle continued1, Variable suction power control, Operations

Models: 33N7

1 16
Download 16 pages 34.31 Kb
Page 8
Image 8
Pet Hair Eraser Floor Nozzle continued 1.

Operations

Pet Hair Eraser Floor Nozzle continued 1.

1.To vacuum rugs and carpeted surfaces, flip down the Pet Hair Lifter until it clicks into place on the front of the Pet Hair Eraser

Floor Nozzle. Then push the brush switch to

Release Button

the carpet position

to pull the

 

 

brushes up into the Pet Hair Eraser Floor Nozzle.

2.

2. To vacuum bare floors, push the brush

 

 

 

switch to the bare floor position

to

 

extend the brushes down from the Pet Hair

 

Eraser Floor Nozzle. Then flip up the Pet Hair

 

Lifter by pushing the yellow release button.

 

This will flip the Pet Hair Lifter up and out of

 

the way.

 

 

 

Variable suction power control

The variable suction power control is located on the back of the vacuum. Turn the control toward the larger dots for maximum suction. Turn the control toward the smaller dots to minimize suction for lightly soiled areas or delicate fabrics.

Air flow regulator

Open the air flow regulator by sliding the regulator back towards the handle to an open position to reduce suction for delicate fabrics.

Close the air flow regulator by sliding the regulator down to the closed position for full suction.

Clean filter indicator

The clean filter indicator is located between the

 

power button and the automatic cord rewind

Clean Filter

button. It will monitor your air flow and let you

know when it is time to clean or replace your

Indicator

filters. If the indicator turns orange while you

 

are vacuuming, your filters need to be cleaned

 

or replaced. If the indicator remains orange,

 

even after cleaning or replacing your filters,

 

turn the vacuum off and check for a clog in the

 

hose or tool.

 

NOTE: The indicator may turn orange when using the tools due to the restricted airflow. This does not necessarily mean that the filters need to be cleaned or replaced. If the indicator does not turn off once the tool is removed, check for a clog in the hose/tools or clean or replace your filters.

Brush Up

Brush Down

168 w w w . b i s s e l l . c o m
Page 8
Image 8
Bissell 33N7 Pet Hair Eraser Floor Nozzle continued1, Variable suction power control, Air flow regulator, Operations