Special Tools
Tip:
Hair, string and small objects can block the Vacuum Hose or Tools. Check them occasionally for obstructions. See Trouble- shooting Guide for instructions.
WARNING: The Rotating Floor Brush continues to rotate while tools are in use. To reduce the risk of injury from moving parts, always move the cleaner with the carry handles at the front and back of the cleaner. Always place vacuum cleaner
on floor with Handle in Upright position when using tools. Never place your fingers under the cleaner when it is running. Never place Powerfoot on furniture, or place vacuum cleaner close enough to objects to pull them into rotating brush.
Your Upright Vacuum Cleaner is not only a powerful carpet and rug vacuum cleaner, it’s also a versatile above floor vacuum cleaner when you select one of the four special tools stored on the Tool Caddy.
1.Raise Handle to Upright Position.
2.Make sure Vacuum Hose is securely inserted in Hose Port (turn clockwise to lock).
3.Slide Cleaning Selector to Tool setting to divert all suction to Hose.
4.Attach tools by firmly pushing/twisting onto Vacuum Hose or Wand.
■Upholstery Tool/Dusting Brush - For dusting surfaces such as table tops, mantles,
lamp shades, drapes, woodwork, etc.
Slide Dusting Brush off for upholstery or stairs.
■Extension Wand- For extra length
or reach. Use with one of three other tools.
■Crevice tool - For tight, narrow spaces.
To resume normal floor vacuuming:
1.Slide Cleaning Selector to Floor to divert the suction back to the Floor Brush.
2.Vacuum Hose may be left in place. For maximum cleaning performance, remove Vacuum Hose from Hose Port and close Tool Door.
Power Cord Storage
When you are done using your BISSELL® Upright Vacuum Cleaner, return it to the Upright position and store the Power Cord.
1.Turn vacuum cleaner off.
2.Unplug Power Cord by grasping the polarized plug (NOT the cord) and disconnect from outlet.
3.Loop Power Cord around Cord Wraps on back of vacuum cleaner.
4.Clip molded plug to Power Cord to secure.
6
