How To Use This Guide
This User’s Guide has been designed to help you get the most satisfaction from your BISSELL
safety precautions, as well as maintenance and troubleshooting instructions. Please read this Guide thoroughly before assembling your vacuum cleaner.
Pay particular attention to the product diagram, assembly instructions, and part names. Locate and organize all parts before assembly. Familiarize yourself with the parts and where they fit. Following this User’s Guide will greatly enhance your ability to get the most performance from your BISSELL
WARNING:
Plastic film can be dangerous. To avoid danger of suffocation, keep away from babies and children.
How To Put It Together
The only tool you’ll need to assemble your vacuum cleaner is a screwdriver.
Attach Handle To Vacuum
1.Locate the vacuum Handle and remove the screw packet taped to the base of the Handle.
2.Stand the vacuum upright and slide the base of the Handle firmly into the grooves at the top of the vacuum body.
3.Check to be sure the Handle is fitted to the vacuum body. If there is a gap in front, continue to push firmly until the Handle is flush.
4.Insert two of the screws from the screw packet into the existing hole. Tighten securely with a screwdriver.
Attach Vacuum Hose and Tools
1.Position the Hose Assembly on the back of the canister as shown.
2.Attach the Hose to the vacuum.
Standard Models - Use the remaining two screws from the packet. Tighten securely with a screwdriver.
Twist ‘n Snap™ Hose Models - (Select Models)
Position the Twist ‘n Snap Hose assembly on the vacuum and line up the tabs on the base of the hose with the corresponding notches. Turn the Twist ‘n Snap Hose to the right to lock into place.
Standard Models
Twist ‘n Snap Hose Models
5
11/4/04 11:20:01 AM |
