Bissell 43Z3 Clearing clogs continued, Tool maintenance, Servicing Of Double-Insulated Appliance

Maintenance and care

Clearing clogs continued

If the clog is contained near the bottom of the hose (close to where tools are attached), follow these steps:

1. Remove wand or tool.

2. Attach hose to the blower outlet and turn the power on.

3. This should dislodge the clog by blowing out debris.

If the above methods are not successful, find the clog by hand, then squeeze the hose and shake until the debris dislodges.

Tool maintenance

Keep tools clean and free of debris.

1. Wipe tools clean with damp cloth.

Note: The multi surface floor tool contains a strip of red material that should not get wet. If it needs cleaning, wipe with damp cloth only.

SERVICING OF DOUBLE-INSULATED APPLIANCE

A double-insulated appliance is marked with one or more of the following: The words DOUBLE-INSULATION or DOUBLE- INSULATED or the double insulation symbol (square within a square).

In a double-insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated appliance, nor should a means for grounding be added to the appliance. Servicing a double-insulated appliance requires extreme care and knowledge of the system, and should be done only by qualified service personnel. Replacement parts for a double-insulated appliance must be identical to the parts they replace.

12 w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

ug110-4053_18P0_608.indd 12 6/13/08 12:35:32 PM