Remove all accessories and parts stored in the bottom of the tank prior to use.
If the round funnel comes out of dirt tank, set back inside the dirt tank before reas- sembling vacuum.
To reassemble, place the top of the unit on the dirt tank so the edges fit together and latch handles to secure top and bottom of unit.
Mount to wall (see instructions below).
Remove the dirt tank by pulling up on both handles to unlatch. Lift upper half of unit to remove.
Assembly
Your unit will require no tools to put together. 1.
2.
3.
4.
5.
Mounting & installation
Only use when properly mounted on the wall. When mounting to a stud, use the (3) center holes.
Mounting on drywall or plaster wall with stud (fasteners included)
1. Locate a stud in your dry wall and drill a 1/8” pilot hole.
2. Mount the bracket with a
3. Ensuring your bracket is aligned correctly with the stud; drill a second pilot hole using the next hole as a guide. Securely fasten with a screw.
Use (3) Middle Holes To Mount Bracket
4. Repeat step 3 for remaining hole.
Note: Mount near a wall outlet, making sure the cord provided will reach the outlet.
5. Mount the unit by making sure the two square slots on backside of unit are sitting on the two hooks on the mounting bracket.
w w w . b i s s e l l . c o m
Warning:
ATTENTION:
Make sure the end of the bracket with the smaller width faces up.
8 0 0 . 2 3 7 . 7 6 9 1 | 5 |
6/13/08 12:35:28 PM |
