Bissell 50Y6 Series warranty Deep Reach tool attachment, select models only, Operations

Operations

Deep Reach tool attachment

select models only

1.Follow instructions 1-4 on page 5 "Getting ready".

2.Set tool on stain and press the trigger to spray solution onto the area to be cleaned.

3.Slowly move the tool back and forth over the soiled surface, keeping the tool in contact with the carpet.

4.Release trigger and move tool slowly over the soiled area to suction up water and dirt.

5.Continue to clean the area, working in small sections, until no more dirt can be removed.

6.Remove tool from hose when fin- ished. Clean under warm water before storing.

IMPORTANT:

Check the manufacturer’s tag before cleaning upholstery. “W” or “WS” on the tag means you can use your Little Green. If tag is coded with an “S” (with diagonal strike-through), or says “Dry Clean Only,” do not proceed. If manufac- turer’s tag is missing or not coded, check with your furniture dealer.

Tip:	Tip:
Deep cleaning	Check upholstery
stairs and high-	stuffing before
traffic areas on	cleaning. Colored
a regular basis	stuffing may
can prolong	bleed through
carpet life.	the fabric when it
	becomes wet.

3.

5.

6.

Tip:

If you would like to store an extra tool on-board, visit BISSELL.com or call Consumer Services at

1-800-237-7691 to pur- chase a tool clip holder.

7

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1