Operations
Pre-treating
Cleaning effectiveness will be enhanced if you
1.Hold the cleaning tool just above the surface of the carpet or upholstery to be cleaned. Press the trigger to release a spray of cleaning solution directly onto the soiled area.
2.Wait 3-5 minutes before cleaning.
WARNING:
Use only BISSELL 2X compact formulas in your cleaner. Use of cleaning formulas which contain lemon or pine oil may damage this appliance and void the warranty. Chemical spot cleaners or
Cleaning with your Little Green PROheat
1.Turn the power/heater to the ON position. Wait 30 seconds before use to allow the heater to reach the proper temperature.
2.Hold the tool approximately 1” above the soiled surface. Press the spray trig- ger to apply the cleaning solution to the soiled area. Raise the tool slighty to check for spray.
3.Using the brush on the tool, gently scrub the area to be cleaned.
4.For thorough cleaning, spray additional solution while the brush and suction are in contact with the surface.
5.Apply downward pressure on the tool and pull it toward you. The suction will remove the dirt and cleaning solution. Continue until no more dirt can be removed.
6.As a final step, use “drying strokes” (by not pressing the spray trigger) to remove as much liquid/moisture as possible.
Repeat this step as often as necessary.
1.
Power/Heater Switch
WARNING:
Do not use an extension cord with this product. The use of an extension cord may result in a severe electrical shock, particularly if the extension cord does not have an electrical rating higher than that of the product, OR if the extension cord does not have a
6 w w w . b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |
