Troubleshooting
Reduced spray or no spray Possible Causes
1.Tank release latch is not closed properly
2.Spray nozzle clogged
3.Clean water/solution tank empty
4.Clean water/solution tank insert clogged
5.Pump needs priming
Remedies
1.Lift up the tank release latch and press down firmly to make sure it is in place
2.Clean spray nozzle
3.Check/refill tank
4.Clean insert at bottom of clean water/solution tank
5.Gently lift clean water/solution tank while depressing the spray trigger OR gently squeeze clean tank while depressing spray trigger
Deep cleaner won’t pick up cleaning solution
Possible Causes | Remedies | ||
1. | Poor tool position | 1. | Reposition tool on surface, |
|
|
| follow recommended cleaning |
|
|
| procedures |
2. | Dirty water/collection tank is full | 2. | Empty dirty water/collection tank |
3. | Tool brush worn | 3. | Replace with new brush |
4. | Excess solution in vacuum flex hose | 4. | Lift tool and point upwards |
|
|
| to allow water in hose to |
|
|
| flow into the dirty water/collection tank |
5. | Incorrect Cleaning Formula | 5. | Use BISSELL 2X compact formulas only |
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of service. Contact us directly at
9
w w w . b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |
