![](/images/new-backgrounds/1063535/6353517x1.webp)
Maintenance and care
Emptying the dirt container
The dirt container should to be emp- tied before the dirt reaches the “Full” line on the container.
1.Unplug the vacuum from electrical out- let.
2.Slide the Lock ‘n Seal Lever to the “Unlock” position.
3.Grasp handle and pull the dirt container straight out to remove from the vacuum.
4.Empty dirt into garbage container.
NOTE: Emptying the dirt container after every use will help prevent over filling and ensure that the vacuum is ready to go the next time you clean.
2.
Unlock
4.
Cleaning the Pre-motor and Post-motor HEPA media filter*
1.Unplug the vacuum from electrical outlet.
2.The
NOTE: The
3.The
It is located behind the door on the side of the vacuum. If the filter becomes dirty, remove the door, remove the filter and replace.
NOTE: The
HEPA
Media
Filter*
Washable
Pre-Motor
Filter
NOTICE:
This product is intended for household use only and not for commercial or industrial use. Vacuuming of dust from products like plaster, concrete or ashes will damage the motor and void the warranty.
WARNING:
Do not operate cleaner with damp or wet filters or without all filters in place.
*The Filter Media, not the vacuum as a whole, complies with the High Efficiency Particulate Air (HEPA) filter specification (EN
9
w w w . b i s s e l l . c o m