Bissell 61C5-G warranty Assembly, Locate and install filters, Attach handle to vacuum

Assembly

The only tool you’ll need to assemble your vacuum cleaner is a Phillips screwdriver.

Locate and install filters

Important: Before using your vacuum, make sure that all filters (pre-motor and post-motor) are in place. Do not operate your vacuum without these filters. Your Total Floors vacuum comes pre- loaded with a post-motor foam filter. If you wish to use the post-motor Febreze® filter instead, locate the Febreze® filter in the vacuum carton and remove the filter from its packaging. Next, remove the post-motor foam filter from the filter door and insert the Febreze® filter in its place as is shown to the right (A). Do not use your vacuum without one of these filters in place. Do not use both filters together.

Attach handle to vacuum

1.Locate the carry handle. Remove the screw packet taped to the carry handle. There are three screws in this screw packet. Two screws are used to attach the upper handle and car- rying handle to the vacuum base. One screw is used to attach the hose guide/tool caddy.

2.Stand the vacuum upright. From the back of the vacuum body, slide the base of the upper handle firmly into the grooves at the top of the vacuum body. Continue to push so that there are no gaps and the front of the handle is flush with the vacuum body.

3.With the upper handle firmly placed on the vacuum body, guide the carrying handle into place onto the back of the upper handle and insert two of the screws into the existing holes. (Reference the rear-facing product view on page 4 to see how the carry handle should look). Tighten screws securely with

a Phillips screwdriver to anchor the carry handle to the upper handle and the upper handle to the vacuum body.

Attach the vacuum hose & tools

1.Attach the 3 hose/tool storage pieces to the back of the unit.

a.Attach the tool storage clip to the back of the handle by snapping the piece into the unit as shown. Push piece straight in until it snaps into place.

b.Attach the hose guide clip to the left side of the back of the vacuum. Insert tab at a 45 degree angle and turn clockwise so it

snaps into place.

w w w. b i s s e l l . c o m

Warning:

Plastic film can be dangerous. To avoid danger or suffocation, keep away from babies

and children.

A.

1.

2.3.

a.

b.

c.

5

8 0 0 . 2 3 7 . 7 6 9 1