Operations
Power cord
The power cord is located at the rear of the vacuum. Gently pull out the power cord, watching for the yellow line. Stop pulling the power cord once the yellow line is visible. There is also a red line, which indicates the end of the usable cord. Do not pull the power cord out beyond the red line.
Automatic cord rewind
Your vacuum is equipped with an automatic cord rewind. When cleaning is finished, press the power button OFF and grasp the plug to disconnect from the electrical outlet. Hold the plug and press the automatic cord rewind button to rewind the cord automatically.
Power button
Turn the power ON or OFF by pressing lightly downward on the power button ( 
).
Automatic Cord
Rewind Button
CAUTION:
Be careful to avoid injury as cord retracts very quickly.
Power
Button
CAUTION:
Before using your vacuum, make sure that the dirt cup and all filters are in place. Do not operate your vacuum without the dirt cup and filters.
NOTICE:
While vacuuming, certain types of carpets and low humidity conditions may generate small static discharges. The discharges are entirely harmless and are not associated in any way with the main power supply.
6 w w w. b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |
