Maintenance and care
Replace drive belt
Use only BISSELL Style 10 Replacement Belts (#32074) in your BISSELL PowerForce Bagless.
1.Unplug cleaner from electrical outlet.
2.With rotating floor brush removed from vacuum cleaner (Steps
3.Place new drive belt over motor pulley and stretch other end over rotating floor brush in the space between the bristles.
4. | Place ends of rotating floor brush down into | Press here |
| slots on sides as shown. |
|
5. | Turn rotating floor brush by hand several times |
|
| in direction of motor pulley. If properly installed, |
|
| drive belt will centre itself on rotating brush. |
|
6. | Reposition brush cover and four screws. Make |
|
| sure end of brush cover is snapped into place. |
|
|
| Brush |
|
| Cover |
w w w . b i s s e l l . c a
1 - 8 0 0 - 2 6 3 - 2 5 3 5 | 11 |
