Bissell 6596 warranty Vacuum cleaner is difficult to push, Possible Causes Remedies

Troubleshooting Continued

Tools won't pick up dirt, continued

Possible Cause		Remedies
3	Dirt Container full	3	Empty Dirt Container
4	Dirt Container or Upper Tank	4	Position correctly and
	not installed properly		lock in place
5	Filters are dirty	5	Check and clean Inner and Outer
			Circular Filters and Pre-Motor Filters.
			Replace HEPA Post-Motor Filter
6	Louver missing or installed incorrectly	6 Check for a clog in the tube in the
			center of the Dirt Container, clear
			and properly install Louvers

Vacuum cleaner is difficult to push

Possible Causes		Remedies
1	Incorrect Height Adjustment	1	Adjust Powerfoot to correct
			height setting
2	Brush Cover installed incorrectly	2	Make sure all three latches
			are secured

Visible dirt escaping from cleaner

Possible Causes		Remedies
1	Dirt Container full	1	Empty Dirt Container
2	Filters missing or installed incorrectly	2	Check Inner and Outer Circular
			Filters and HEPA Post-Motor Filter
			for correct installation
3	Dirt Container installed incorrectly	3	Pull out and re-insert Dirt
			Container correctly
4	Filter Cup installed incorrectly	4	Remove Dirt Container and make
			sure Filter Cup is fully attached

If suggested solutions do not correct the problem, call:

BISSELL Consumer Services

1-800-237-7691

Monday - Friday	8 a.m. — 10 p.m. ET
Saturday	9 a.m. — 8 p.m. ET

or visit the BISSELL website - www.bissell.com

13

ug203-2829_6596_1105.indd 13 1/11/06 4:03:41 PM