Attach Vacuum Hose and Tools Continued
7.Place the TurboBrush in the Bracket by aligning the bottom of bracket with the opening of the brush roll and snap the TurboBrush into place.
How To Use Your Vacuum
Handle Positions
Press the Handle Release Pedal with your foot to place your vacuum in one of three cleaning positions.
1.Upright- For storage and above floor cleaning with tools.
2.Normal Cleaning- Press Handle Release Pedal once. Use for most household floor cleaning tasks.
3.Low Cleaning- With the vacuum in normal cleaning position, press Handle Release Pedal again. Use for reaching under low furniture such as tables, chairs or beds.
Height Adjustment
The Powerfoot/Rotating Floor Brush can be adjusted to clean several floor surfaces.
NOTE: For optimal cleaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting.
CAUTION:
Before using your vacuum, make sure that the Dirt Container is in locked position and that all filters (Inner Circular, Outer Circular,
1.Place Handle in Upright Position.
2. | Turn Height Adjustment Knob to desired setting. |
| Tip: | |
| Lowest Setting | For bare floors. | 5 | Before cleaning under |
| Medium Settings | For short and medium |
| low furniture, check |
|
| pile carpets. |
| area first for objects |
| Highest Setting | For plush pile carpet. |
| that might harm the |
| Place the Handle in the normal cleaning position and |
| unit or block the | |
3. |
| Vacuum Hose. | ||
| the Powerfoot will adjust to the setting chosen. |
|
| |
NOTE: You may also adjust the setting | Tip: |
while in the normal cleaning position. | |
|
Transporting Cleaner
1.To move your cleaner from room to room, put the Handle in the upright position, tilt the cleaner back on its rear wheels and push forward.
2.The cleaner can also be moved by using the Carrying Handle on the back.
Carrying Handle
Your vacuum features a Quick Release Cord Wrap. To remove the Power Cord quickly and easily, rotate the Upper Cord Wrap towards floor, and slip Power Cord from Upper and Lower Cord Wraps.
6
1/11/06 4:03:36 PM |
