Bissell 68Z3 warranty Power button, Variable suction power control, Air flow regulator

Operations

Power button	Power
	Button

Turn the power ON or OFF by pressing lightly downward on the power button ( ).

Variable suction power control

The variable suction power control is located on the back of the vacuum. Turn the control toward the larger dots for maximum suction. Turn the control toward the smaller dots to minimize suction for lightly soiled areas or delicate fabrics.

Air flow regulator

Open the air flow regulator by sliding the regulator back towards the handle to an open position. This will reduce the suction power for vacuuming delicate fabrics.

For full suction power, close the air flow regulator by sliding the regulator forward to the closed position.

Variable Suction Control

Air Flow

Regulator

Tip:

Use the variable suction power control and the air flow regulator to reduce air flow as needed when using the tools.

caution:

Before using your vacuum, make sure that the dirt container and all filters (pre-motor and post-motor) are in place. Do not operate your vacuum without the dirt container and filters.

7

w w w . b i s s e l l . c o m