Maintenance and care
Emptying the dirt container
Empty the dirt container as soon as the dirt reaches the “FULL” lines on the sides of the dirt container.
1.Unplug the vacuum from the electrical outlet.
2.Press the dirt container release button located on the back of the carry handle and lift up to remove.
3.Choose an emptying method. Method #2 is recommended for allergy sufferers.
Method #1 – Hold the dirt container over a trash can and push the emptying button located on the back bottom of the dirt container to open the bottom door. Close the door after the dirt empties and make sure it clicks back into the locked position.
Method #2 – Place a plastic bag over the bottom of the dirt container. Push the emptying button, located on the back bottom of the dirt container, through the plastic to open the bottom door. After the dust settles, remove the plastic bag to discard. Close the door and make sure it clicks back into the locked position.
WARNING:
To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.
2.
Dirt Container
Release Button
3.
Emptying
Button
Cleaning the inner cyclone & screen
Filters protect the motor from dirt and dust particles. Use only BISSELL replacement filters in your CleanView Dual Cyclonic.
1.Unplug the vacuum from the electrical outlet.
2.Remove the dirt container from the vacuum.
3.Remove the top portion of the dirt container by grasping the carry handle and turning counter clockwise and pull- ing up and out of the dirt container.
4.Remove the inner cyclone by grasping the bottom of the cyclone and turning clockwise to unlock. Pull straight down to remove. Clean with a cloth to remove dust and debris
5.Remove the screen by pulling straight down. Clean with a cloth or a soft brush to remove dust and debris.
3.
4.
5.
9
w w w . b i s s e l l . c o m
