Assembly
Your ProHeat 2X comes in three, easy to assemble components:
Upper Handle
Lower Handle Tool Caddy
The only thing you will need to assemble your
cleaner is a Phillips head | screwdriver. |
Warning:
Do not plug in your cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operating procedures.
1.Slide upper handle onto lower handle.
2. | Screw 3 screws into the marked holes. |
|
3. | 1. | 2. |
Place upper hose rack onto back of upper |
|
handle, and secure with tapered screw.
4. Place lower hose rack onto back of upper handle by pushing in and sliding down until it snaps into place.
5.Snap tools into the tool caddy as shown in
figure 5. | 3. | 4. |
6.Wrap power cord and flex hose as shown in
figure 5.
7.Keep flex hose snugly in place by using
the hose secure latch.
ProHeat 2X assembly is now complete.
| 5. | Tough |
|
| |
Crevice Tool |
| Stain Brush |
| TurboBrush | |
Holder |
|
Spraying |
Crevice Tool |
7.
Hose Secure
Latch
6 w w w . b i s s e l l . c a
1 - 8 0 0 - 2 6 3 - 2 5 3 5
