Maintenance & Care
After cleaning
1.Unplug power cord from outlet.
2.Empty and rinse the dirty water tank after each use, OR when dirty water reaches the indicated maximum fill line.
a. To remove the dirty water collection tank, simply lift up on the tank from the base of the machine.
b. Pull tab to remove plug from tank
c. Rinse out dirty tank with clean water after emptying.
d. Disconnect the cleaning tool from the spray trigger by pushing down on button lock and pulling straight off. (Do NOT twist tool to remove it).
e. The front of the Tough Stain Tool can be removed for easy cleaning. Push the button at the top of the tool and slide the front of the tool off the base. Rinse both under water and replace the front of the tool.
f. Check spray nozzle for accumulated dirt or debris. If necessary, clean with soft bristle brush.
g. The float stack can be removed from the dirty tank for cleaning. Turn it
WARNING
To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.
Machine storage
1.Wipe all surfaces with a soft cloth.
2.Wrap power cord around the cord wrap on the back of the machine.
3.Wrap flex hose around the base of the unit and secure the spray trigger.
4.Store unit in protected, dry area, at room temperature (40° to 110°F).
Thermal protector
An internal thermal protector has been designed into your cleaner to protect it from overheating. When the thermal protector activates, the suction motor will stop operating. If this happens, proceed as follows:
1.Turn the cleaner OFF (O) and unplug from electrical outlet.
2.Check the end of the hose and tool for blockages and remove if necessary.
3.Check the float stack for clogs. Refer to cleaning instructions above.
4.When the motor cools for approximately 30 minutes, the thermal protector automatically resets and cleaning may continue. If the thermal protector continues to activate after following the above steps, your cleaner may need servicing. Call BISSELL Consumer Care or visit the website.
8
www.bissell.com 
800.237.7691
