Stain Removal
Do Not Delay! Failure to attend to an accident soon after it occurs may cause it to set and become permanent.
Before treating any stain, follow these
Blot up liquids with an absorbent cloth or paper towels.
1. White materials are recommended because certain dyes may bleed and make the stain worse.
Gently scrape up semi-solids with a spoon or spatula.
2. Do not use a knife or other utensil with sharp edges because it could damage the carpet or upholstery.
3.
Be sure to pre-test any spot removal solutions or chemicals
4. on an inconspicuous area first. This is extremely important; some dyes and materials could be damaged or discolored by a cleaning solution. If such a change should occur, try a different solution or call a professional. If cleaning on Berber Carpet gently run your machine over a hidden area. If no fuzzing occurs, continue cleaning in soiled area.
Use one of the following methods to Preclean the stain:
| Using Bissell Tough Stain PreCleaner, generously | |
5. | ||
spray evenly over soiled area, do not overwet carpet. | ||
| Wait 3 – 5 minutes. Gently work the solution by blotting | |
|
area with a clean, damp, color safe cloth.
6.
7.
or
Use your BISSELL deep cleaner as a Precleaner. With one of the tools attached to hose, set the Ready Tools Dial to Pretreat and the SmartMix Dial to the High Traffic setting. Spray the area with solution and allow the Deep Cleaning formula to penetrate for
Once the Precleaning is complete, use the attached tool to gently scrub the stain with back and forth strokes.
Allow to dry. Some difficult stains may require a second treatment.
12
3/11/05 8:31:23 AM |
