![](/images/new-backgrounds/1060671/6067131x1.webp)
Machine Preparation
Set up machine following instructions in the Features
1. section, pages 6-9. Be sure to thoroughly rinse out any remaining Fiber Cleansing Formula from the SmartMix Tank to prevent slippery linoleum, vinyl, and tile floors. Use BISSELL
Hard Floor Solutions in the SmartMix Tank.
Check ReadyTools Dial - it should be set on Floor Cleaning.
2.
Set the SmartMix setting to Normal.
3.
Plug into a proper outlet and turn Power Switch ON ( I ). Turn
4. SmartTemp Switch ON ( I ). The SmartTemp Ready Light illuminates and the ProHeat is ready to clean.
Cleaning Bare Floors
The Bare Floor Tool (available with select models only) provides effective cleaning for linoleum, vinyl, and tile floors. Caution: Do not use on hardwood floors.
Use BISSELL Hard Floor Solutions™.
Vacuum or sweep thoroughly to pick up loose debris and pet hair.
Remove easily moved furniture from the room, (chairs, tables, etc.)
Plan your cleaning route to leave an exit path.
Plan activities to allow 30 minutes for the floor to dry completely.
Attach the Bare Floor Tool
Step on the Handle Release to lay the machine handle down.
Remove the Tank-in-Tank from the machine base.
Lift the machine base to expose the underside of the Floor Nozzle Window.
Attach Bare Floor Tool to Floor Nozzle Window with long tab to the right side (ReadyTools side) of the nozzle.
First attach left side (short tab) catching tab over nozzle edge.
Gently bend long tab (right side) outward to easily snap over edge of clear nozzle on left.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
16
Tilt
Handle
Back
Handle Release
Carrying
Floor Nozzle
Bottom Front Edge
of Floor Nozzle
Bare Floor | Snap Together | |
Cleaning Tool | ||
|
D
3/11/05 8:31:25 AM