Bissell 7950 When It’s Time to Empty Tank-in-Tank, Uses to keep the Belts running free

Models: 7950

1 24
Download 24 pages 1.55 Kb
Page 8
Image 8

Tank-in-Tank

Our Tank-in-Tank system is designed with a bladder inside for clean water. As you clean, the Bladder will empty. Dirty water collects in the tank outside the Bladder.

 

Step on Handle Release to lay the machine handle

1.

down out of the way.

 

Lift the Tank-in-Tank handle. The handle locks the

2.

lid in place.

 

Carry it like a bucket to fill at the sink.

3.

Note: You may notice hair and debris deposits

 

on the carpet that were loosened by the

 

brushing action (especially with newer

 

carpets that have never been deep cleaned

 

before). This debris should be picked up

 

and thrown away. Debris that deposits in

 

the Brush Belt should be cleaned between

 

uses to keep the Belts running free.

 

Set the tank down and rotate the handle forward to

4.

unlatch the lid. Lift off and set the lid aside.

 

Find the mouth of the Bladder and fill to the bottom

5.

of the neck with clean hot tap water. *Do not boil or

 

microwave water as it can destroy the Bladder.

 

Note: Fill the Bladder with clean hot tap water only.

 

Replace the Tank Lid matching the lid and tank edges.

6.

Handle must be in the forward position to reinstall.

 

Rotate the handle to the carrying position to re-latch

7.

the lid.

 

Replace tank in machine base, seating firmly in place.

8.

 

 

Rotate handle back down to the latched position.

9.

Note: Both the SmartMix Tank and the clean

water tank must have liquid in them for the machine to spray. If one tank is empty the machine will not apply either cleaning solution or water only.

1.

Handle

Release

Lift and Carry

2.

Rotate Handle to

Unlatch

4.

5.

Fill Bladder only with clean hot tap water

9.

Latched

When It’s Time to Empty Tank-in-Tank

1.

2.

3.

84.

Remove the Tank-in-Tank, following steps 1 and 2 above.

Carry the Tank-in-Tank, like a bucket, to the sink where you will dispose of the dirty water.

Remove Tank Lid by rotating handle forward to unlatch lid and lifting lid off tank.

Pour out dirty water.

3.Rotate Handle to Unlatch

Pour out 4. dirty water

ug310-5861_7950_205.indd 8

3/11/05 8:31:16 AM

Page 8
Image 8
Bissell 7950 warranty When It’s Time to Empty Tank-in-Tank, Uses to keep the Belts running free